Skip to content
    de
    Fortbildung

    Product safety: Electromagnetic Compatibility of electrically operated products

    MEDICAL DEVICES

    Electromagnetic Compatibility (EMC) is two-folded. The device is expected to function and perform safely without interfering with other devices and systems in the electromagnetic environment in which the manufacturer has intended the device to be used throughout their expected service life.

    Secondly, EMC is that the device shall be adequately immune to the electromagnetic phenomena in the environments in which the manufacturer has intended the device to be used throughout their expected service life.

    IEC 60601-1-2 is one of the collateral standards within IEC 60601-1 and it concerns electromagnetic disturbances. It is a risk-based standard. Although this standard scope includes medical devices, the requirements are mostly standardized to cover other electrical devices and are universal.

    The IEC 60601-1-2 standard is essential for medical device manufacturers. The standard covers an essential part of compliance with the EU MDR and FDA requirements.

    Note, that FDA does not recognize the EMC standard for IVD devices, which is IEC 61326-2-6. FDA highlights that the IVD standard confers less expectation of predictability than the FDA-recognized IEC 60601-1-2 standard or provides only part of a complete immunity test for products.

    About the IEC 60601-1-2 Standard

    The IEC 60601-1-2 standard includes 102 pages and covers, e.g.:

    – General requirements: risk management, non-medical equipment, test conditions
    – Identification, marking and documents
    – Documentation of the tests
    – Electromagnetic emission and immunity requirements

    The IEC 60601-1-2 standard is a harmonized standard for the Medical Device Directive. It will be harmonized to the Medical Device Regulation ETA in 2024 as EN 60601-1-2.

    IEC 60601-1-2 training

    Labquality provides IEC 60601-1-2 standard training, which will provide you with essential knowledge about the EMC, the standard and how to use it.

    Although this training introduces the EMC phenomenon utilising the medical device standard IEC 60601-1-2, the EMC is a phenomenon related to all electrical devices. The most common EMC requirements for electrically operated products are covered.

    Inhalt

    • Why the standard?
    • Relationship of the standard to other standards in IEC 60601-1
    • Scope of application of the standard
    • Introduction to IEC 60601-1-2
    • The future of IEC 60601-1-2 in brief, incl. AMD1: 2020
    • IEC 60601-1-2 requirements and tests
    • Electromagnetic emission into the public distribution network / environment
    • Electromagnetic immunity to the public distribution network / environment
    • EMC Plan
    • EMC Report
    Registrieren

    Trainer

    Zielgruppe

    Designers of the medical electronic devices (electronics, mechanics, radiation, usability, software), regulatory and quality responsible persons, device risk assessment responsible persons.

    Nach diesem Training

    • You will understand EMC phenomena.
    • You will understand the requirements of the standard and how to use it.
    • You will be able to combine the standard with other device-specific standards.
    • You recognise the risks that the standard requires you to consider.
    • You will know how the requirements will soon change.

    Was als nächstes?

    Sie könnten interessiert sein an

    ISO 14971:2019 Riskienhallinta
    Koulutus antaa yleiskatsauksen ISO 14971 -riskienhallintastandardiin ja sen vaatimuksiin.
    Weiterlesen
    Product safety: Electrical, mechanical, radiation, usability, software
    Weiterlesen

    RECHNUNGS- UND STORNIERUNGSBEDINGUNGEN

    Lesen Sie hier die Abrechnungs- und Stornierungsbedingungen für Online-Schulungen.

    Die Teilnahme an der Schulung kann zwei Wochen (14 Tage) vor der Veranstaltung kostenfrei storniert werden. Bei Stornierungen, die danach erfolgen, berechnen wir 50 % der Teilnahmegebühr, bei Stornierungen, die eine Woche vor der Veranstaltung erfolgen, berechnen wir 100 % der Teilnahmegebühr.

    Stornierungen erfolgen immer schriftlich an: koulutus@aurevia.com.  
    Die teilnehmende Organisation kann den Teilnehmer auf Wunsch kostenlos wechseln, indem sie dies vor der Veranstaltung schriftlich an:  koulutus@aurevia.com meldet. Die Teilnahmegebühr wird unmittelbar nach der Veranstaltung in Rechnung gestellt. Die Trainingseinheit wird dem Teilnehmer ca. eine Woche vor der Veranstaltung per E-Mail bestätigt. Labquality behält sich das Recht vor, die Schulung aufgrund einer zu geringen Teilnehmerzahl abzusagen.